This AR15 Starter kit with Magpul products is just what you need to get your
AR15 off to a great start!
This AR15 kit inclues -
1. Magpul ACS Stock
2. Magpul MOE Handguard AND 2 Rail Sections
3. Magpul MOE + Pistol Grip
Price: $154.95 / Each
1. Magpul ACS Stock - MAG371BLK
The patented Magpul ACS (Adaptable Carbine/Storage) –
Commercial-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines
using commercial-spec sized receiver extension tubes. A streamlined, anti-snag
profile shields the release latch to prevent accidental activation. Similar to
the Magpul CTR®, the ACS also features a supplemental friction lock system that
minimizes excessive stock movement for enhanced weapon stability and accuracy*.
Dual, rear accessible, water-resistant battery storage tubes and an integral
storage compartment in the butt of the stock provides multiple storage options.
The ACS comes standard with a 0.30" thick rubber butt-pad which provides
positive shoulder purchase to prevent slippage even with body armor or modular
gear. Made in U.S.A.
Mounts on commercial-spec sized carbine receiver extension
tube (not included) from manufacturers such as Bushmaster, DPMS, Olympic, and
others (please see the note below)
Sloping cheek weld provides a wide contact surface for user
Two water-resistant battery storage tubes located on the left
and right sides of the stock
Each tube will store up to three CR123 lithium or two AA
Tubes are accessible from the rear via a tethered,
hand-removable rubber plug
Storage compartment in tail of stock with positive latching
access door on right hand side
Shielded release latch prevents snagging and accidental
Premium chrome-silicon lock spring provides positive locking
and long service life
Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface
and increases impact protection
Compatible with Magpul ASAP® and other receiver-mount sling
Mid - Now includes the QD Swivel Sling Mount that fits up
to 1.5" push-button swivels
Rear/Bottom - 1.00" sling loop
ACS, Commercial-Spec (stock configuration)
Weight: 0.88 lb.
Weight, w/ Rec. Extension: 1.22 lb.
Length, Maximum: 7.95 in.
Width, Maximum: 2.58 in.
LOP Adjustment Range: 3.80 in.
LOP, M4 Collapsed: 11.75 in.
LOP, M4 Extended: 15.55 in.
NOTE: There are two basic sizes of M4 Carbine receiver
extensions (buffer tubes): mil-spec and commercial-spec. If you have a mil-spec
extension on your rifle, make sure to order the Mil-Spec ACS.
2. Magpul MOE Handguard MAG424BLK
The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4
firearms with carbine-length gas systems combines the light weight of a standard
hand guard with modular flexibility. Designed with versatility in mind, M-LOK
slots at the two, six, and ten o'clock positions allow the attachment of
optional 1913 Picatinny rail sections and other M-LOK accessories for the direct
mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant
polymer construction provides operational durability without the weight and
expense of an aluminum rail hand guard. Front extensions and lower lip provides
additional operator protection from hot front sight assembly. Made in U.S.A.
Replaces standard M4 Carbine-type plastic hand guards
Compatible with most piston-driven as well as 'direct impingement' gas
Easy to install utilizing existing delta ring and round or triangular
front hand guard retaining cap
M-LOK slots at the two, six, and ten o'clock positions for mounting
MIL-STD-1913 Picatinny rails or other direct-attach M-LOK accessories
Reinforced, heat-resistant polymer construction
Integral riveted aluminum heat shield
Front lip and side extensions, shields hand from hot gas block
Relieved area at the top rear accommodates many overhanging optic
MOE M-LOK Hand Guard, Carbine-Length
Weight: 6.8 oz.
Length, overall: 7.1 in.
Length, mounting: 6.6 in.
Height, excluding lip: 2.5 in.
Width, max: 2.2 in.
NOTE: The MOE M-LOK Hand Guard – Carbine-Length is a
direct replacement for existing M4 carbine type hand guards and utilizes the
existing front hand guard retaining cap and delta ring.
3. Magpul MOE + Pistol Grip MAGBLK
The MOE+ Grip combines reinforced polymer body construction with comfortable,
wrap-around rubber overmolding for maximum weapon control in adverse
environments. With a similar shape to a 'medium' sized MIAD, this AR15/M4
drop-in design features a hard-polymer bottom edge to reduce the possibility of
equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for
gear stowage and includes a basic grip cap. All mounting hardware
Replacement for AR15/M4 pistol-grip*
One-piece reinforced polymer construction with wrap-around
Beavertail backstrap for enhanced ergonomics
Hard-polymer bottom edge to reduce equipment snags or grip
Includes a basic grip cap, but accepts optional Storage Cores
for customized gear stowage
Weight, w/hardware: 3.4 oz.
Height, receiver to bottom: 4.0 in.
Thickness, max: 1.2 in.
4. Magpul Rail Section MAG409BLK
Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail
Sections allow the attachment of various 1913 Picatinny spec rail-mounted
accessories such as lights, vertical grips, etc. Injection molded from a
proprietary reinforced composite for enhanced strength and durability while
remaining lightweight, Rail Sections also feature beveled ends to reduce
snagging and eliminate sharp corners and edges. All hardware necessary for
attachment directly to integral mounting slots on MOE Hand Guards and Forends is
included. Additional hardware may be necessary for other applications. Size L5
(11 Slots), max overall length of 4.9". Mounting screw center-to-center of 3.2".